Wooden floors get worn over time as you shift furniture, get pets, wear high heels, and have kids play around. No matter how tough the wooden floor might seem, the finish is easily susceptible to scruffs and scratches. This is why you need to regularly polish the wood floors to restore their shine. Instead of getting refinishing done, it is better to opt for floor polishing Perth. Refinishing should be done after a few decades as it is a process that sands the floors entirely for a timber floor restore.
How to Polish Wood Floors and Restore Their Shine?
- Step 1: Determine the Wood Floor Finishing
- Step 2: Clean and Clear the Wooden Floors of Dirt and Dust
- Step 3: Polish the Floors
- Step 4: Hold off the Timber Floor Restore for a Day
- Step 5: Follow Precautions
What Is Timber Floor Polishing Perth?
To get a better idea about how you can polish wood floors to restore their former glory, you need to first understand what it is. Polishing is a straightforward process wherein you use a product that is designed for regaining the shine of the floors. The product is formulated exclusively for the floors. When you use it, you get to extend the life of the wooden floors.
How to Get Started?
To get started with timber floor restore, you need a flat-head mop that has a microfiber cleaning pad along with commercial wooden floor polish. The polish would come in high-gloss or low-gloss sheen for achieving the best outcome.
The finishing influences whether the floors should be polished or not. For instance, floors that have a protective surface like urethane or any other waterproof barrier can benefit from a polish. However, as for floors that have a penetrating finishing or unsealed wood, the wax would be a better option. If you use the wrong product, it would cause a variety of problems such as impairment of proper refinishing later on or dulling the finish. Therefore, the first thing that you need to do is determine the type of floor you have.
What Tools And Materials Are Required for Floor Polishing?
To polish wood floors, you will need the following tools and materials.
- Wood floor polish
- Flathead mop
- Microfiber mop pad
- Hardwood floor cleaner
- Sponge mop
Step 1: Determine the Wood Floor Finishing
As mentioned above, it is important to start the timber floor restore process by determining the wood floor finishing. If you do not know the exact type of finish of the floor, you can scrape off a bit of the area using a sharp blade.
OUR SERVICES INCLUDE:
- Floor Sanding & Polishing
- Timber Floor Restore
- Timber Floor Refresh
- Vinyl Floor Polish
- Timber Floor Sanding Perth
If no clear material gets scraped up and the finish is smudged, it simply means that the floor has a penetrating finish. There is no need to polish such wooden floors as they only need to be waxed. On the other hand, if there is clear material, the flooring has a surface finish which means that you can polish it.
Step 2: Clean and Clear the Wooden Floors of Dirt and Dust
To proceed with polishing the wooden floors, you first need to remove the furniture. Make sure to remove most of the furniture to thoroughly clean the floor to remove dirt and dust. Vacuum or sweep the floor first, then, mop the floor using a high grade wood floor cleaner. You can also use a solution of dish soap and warm water to penetrate through the grime. After this, mop the floors to remove any residue left by the cleaner. Finally, use a clean towel to dry the floor completely.
Step 3: Polish the Floors
Now, you can use the wood floor polish on the floor to give it a shine. Begin by polishing the corner of the room and make your way from there. It is advised that you use a flat-surface mop and work the solution in the desired direction to smooth out air bubbles and particles. Always polish a small area and completely coat it rather than rapidly coating a large area.
Step 4: Hold off the Timber Floor Restore for a Day
Before you work on timber floor restore, you need to wait at least a day. Do not permit traffic into the room for an hour and hold off moving the furniture until a day to avoid any scratching. Never slide or drag the furniture as it would damage the floor. Hence, you should always pick up items and place them.
Step 5: Follow Precautions
To ensure that the wood floors look their absolute best, you need to follow a few precautions like placing rugs at the entrance to prevent any dirt from getting inside. You can also place a rug near the sink to trap drops of water.
Once you have gone over this post, you will have no trouble polishing wooden floors to restore their shine. Although you can work on timber floor restore, it is always advised to hire an expert for floor polishing Perth. It makes all the difference.
Next Article: Importance of Professional Floor Polishing