Timber floors entirely change the look of the place with its warm and attractive look. Additionally, you can choose the colours of the timber floor as they come in a wide range of colours. These are easy to maintain and durable. Therefore, many people go for it. These are not only used for residential places but are also ideal for commercial areas. Due to its trend in the market, offices, shop owners and other business people choose this timber flooring to make their place look incredible.
In contrast to carpeted floors, which simply serve to trap dirt and allergens and have a short lifespan, this is best. It is not only harder and more lasting than the majority of other flooring products, but also healthy, natural, and simple to maintain. When it gets wear and tear, people have to do timber floor sanding in Perth.
The installation of timber floors is quite straightforward. However, not everyone can install them, but having a little knowledge, people may learn to install them easily. Therefore, whenever you need to renovate your house, you must know these rules to install floors.
Consider these rules before start installing timber floors
Things to be aware
- Always inspect the boards and attachments after delivery.
- Verify the order’s grade, size, moisture levels, and appearance requirements, to quickly recognise issues
- Always bring the floorboards inside as soon as possible following delivery.
- Check the floor panels in a few opened packs for any obvious flaws, including
- damage,
- Stark colour changes,
- And, form or metric variations.
- Always check that the subfloor is level and in good condition before beginning the installation.
- The subfloor must adhere to the specifications in this instruction manual, and that is vitally essential.
- The installer or contractor is in charge of confirming the subfloor’s state and making sure it complies with best practices.
- Before the panels are installed, any conditions that are not met must be fixed.
- Always verify the designer’s floor layout, drawings, and detailed finishes.
- Make sure all additional materials, such as the sealant, mouldings, and stair nose, are prepared.
Timber floors are the best choice. When it comes to maintaining hardwood floors, these are ideal for it. When the floor fades, you can make it renew with timber floor sanding and polishing in Perth. These are very popular services in Perth. Many people do it by themselves, while many others hire professionals for this.
Prepare Subfloor
Before installing the timber floors, you have to make sure that the subfloor is ready. The subfloor is the outer layer of the floor on which timber floors are installed. The subfloor should be dry, smooth, hard, and clean. Moreover, the floor should be adequate and have the capacity to bear traffic.
Across a distance of three consecutive meters, the subfloor level tolerance is less than a 2.5 mm change in height. The distribution of cases that exceed 3 mm needs to be smoothed out. Otherwise, it will be problematic when you do timber floor sanding in Perth after a few months.
There are two types of floors. One is the concrete floor while the other one is the wood floor that you may need to renovate with a new one.
Preparation of Concrete floor
In the higher areas of a concrete floor, the concrete can be ground to level it. Or the lower area can be filled with self-levelling compounds. The subfloor needs to be clear of sand and dust if the timber floor needs to be glued down. A concrete floor with a moisture content of over 5% needs to be waterproofed and properly cured before installation begins.
Old timber floor
Check the subfloor for any loose components if it is an old hardwood surface or bearers and joists made of wood. And then secure the same in position. Floor sanding in Perth or the addition of fresh chipboards are two options for leveling the subfloor. Before putting in a new floor, repair any damaged subfloor. Make sure there is always enough ventilation to give the subfloor a chance to breathe.
Install new timber floors
After you prepare the subfloor, it is ready to install the new timber floors. There are three methods of placing timber floors.
- Complete adhesion to the surface
- Method of nailing down the installation
- Floating floor installation
Basic guidelines to install timber floors
- According to their structural traits—knots, grain, and colour variations—floorboards should always be divided up into three groups.
- This makes it simpler to guarantee an even distribution when installing the floor, resulting in a lovely and unified appearance.
- Use a pressing block that is big enough.
- Place a protection mat on the floor at all times to prevent damage from other trades’ work. Before you lay the protection, inspect and vacuum the floor.
Conclusion
Timber floors are easy to maintain and durable. Moreover, these floors are easy to install. Therefore, everyone uses them to make their places look beautiful. When these floors fade, you can make them new with timber floor sanding in Perth. The timber floor sanding cost in Perth is not too high. However, it is not too low. Sometimes people hire professionals and most of the time they do it by themselves. Installing the new floors requires some knowledge. If you want to save cost, you can do it by yourself. However, there are some rules that you must know how to do.
